Lesson 2.9_ Managing Requisitions (Concepts)

In this lesson, you will learn about how to  manage the requisition lifecycle, become familiar with the Return to Vendor process, and to run query reports.

Steps:

1. Press the [Enter] key to advance to the next page.

   Step 1

2. Press the [Enter] key to advance to the next page.

   Step 2

3. Press the [Enter] key to advance to the next page.

   Step 3

4. Press the [Enter] key to advance to the next page.

   Step 4

5. Press the [Enter] key to advance to the next page.

   Step 5

6. Press the [Enter] key to advance to the next page.

   Step 6

7. Press the [Enter] key to advance to the next page.

   Step 7

8. Press the [Enter] key to advance to the next page.

   Step 8

9. Press the [Enter] key to advance to the next page.

   Step 9

10. Press the [Enter] key to advance to the next page.

    Step 10

11. Press the [Enter] key to advance to the next page.

    Step 11

12. Press the [Enter] key to advance to the next page.

    Step 12

13. Press the [Enter] key to advance to the next page.

    Step 13

14. Press the [Enter] key to advance to the next page.

    Step 14

15. Press the [Enter] key to advance to the next page.

    Step 15

16. Press the [Enter] key to advance to the next page.

    Step 16

17. Press the [Enter] key to advance to the next page.

    Step 17

Once you click finish below, go to the course outline and select 2.9.1 Simulation_Running Query Reports to launch the simulation.

Remember, the simulation will open in a separate window. Select the Try It simulation mode. Follow the instructions provided for you in the Try It mode.

Click the Actions link in the text bubble to perform other navigation actions.

Table of Contents  Start Topic